Tag Archives: Product Prototype Development california

Product Prototype Development – Why Its Necessary?

Product Prototype Development
Product Prototype Development – Why Its Necessary? 5.00/5 (100.00%) 2 votes

Undoubtedly, product prototype development is one of the most necessary steps when manufacturing a new product from scratch. But what is a product prototype? In simple terms, a product prototype can be defined as a tangible version or a ready to test version of a product to be developed – which you can touch, feel, and see. A prototype lets you test your concept in the primary stages before you move on to the bulk manufacturing phase and offers you an opportunity to make your final product more successful and customer-centric.

Its 2016, and the importance of product prototype development has increased with every passing day. It is necessary because, it allows you to feel your concept, it lends you an opportunity to attract potential investors and customers, and most importantly, it allows you to test your concept before you proceed towards to final manufacturing phase. Whether you are planning to develop an electromechanical product, a product with imbedded software, a plastic, metallic, or fabric product, or a medical device, there are tons of advantages of getting a product prototype made.

Here are some of the most common reasons that justifies, “Why Product Prototype Development is Necessary Before New Product Development”, and they are as follows;

Product Prototype Saves Precious Time:

When you consider launching a new product into the market, time is a most important factor. You need to manufacture and launch your product in the market before anyone else does it. Product prototype development eliminates much of the time that is required or unnecessarily wasted to create patterns, custom tools, and multiple molds for conventional molding. It lends you an opportunity to save time that might be wasted between the initial designing and the analysis, eventually reducing your product’s time to market. A product prototype can be developed easily to test features, performance and usability that would have consumed more time by using the traditional method. Rapid prototyping saves your time; hence, you can get your product in the market fast before your competitors.

Product Prototype Opens Up Innovation Opportunities:

Another crucial benefit of prototype development is that you or the product development company you hire have the freedom to create mockups that are complex in surfaces and shaped without worrying about precision. As you get multiple opportunities to modify (both functionally and aesthetically) your concept before final manufacturing process, rapid prototyping takes the creativity to the next level.

Product Prototype Saves Your Money:

In terms of time and money, manufacturing a new product from scratch is always a matter of risk. Real innovation always comes with a risk of failure. Thomas Edison once said, “We now know a thousand ways not to build a light bulb.” Rapid prototype development saves your hard earned money, because it helps you identify and weed out the approaches that don’t work.

Product Prototype Reduces the Risks of Errors:

Simple looking product errors can lead to complex problems in a long run. Rapid prototyping eradicates the probabilities of such tiny errors that can lead to product failure. A product development company can recognize errors and faults, and make fast modifications before bulk manufacturing takes place. Prototyping ensures that the final product is designed and developed as per our expectation. The success of the envisioned product predominantly relies on the prototypes.

If you have a product idea and are looking for a product prototype development company that can help you create a final prototype, then GID Development Corporation can certainly help.

Based in California, USA, GID Company is a product design, product development, and product prototype development company. Whether you are planning to develop products with electronics, products with imbedded software, electromechanical products, medical device products, any other types of products, GID Development Corporation has the skills and vehemence to bring your concept to life. Along with over-the-top designing and manufacturing services, GID also offers promising prototyping services that help take a product concept to reality and into the hands of prospective customers.

To learn more about GID Development Corporation, visit http://www.gidcompany.com/ or call Patrick for a free consultation at 714.528.2482 from 8 AM to 5 PM PST Monday through Friday.

Product Prototype Development – Difference Between Alpha & Beta Prototypes

Product Prototype Development
Product Prototype Development – Difference Between Alpha & Beta Prototypes 3.60/5 (72.00%) 5 votes

For an inventor, product prototype development is essential. After all, a product prototype is a physical manifestation of a mere idea, which can serve different purposes. For one, a product prototype gives a clearer picture of how the potential product will look like. With a product prototype, the inventor can also test the various functions of the potential product in the real world. A product prototype also assists in making the final product better. Another important purpose a product prototype serves is it helps attract stakeholders, and eventually, the capital that helps take the product further close to the prospective consumers. The cardinal role a prototype plays in the new product development makes product prototype development an important function that no inventor should overlook.

Anyone can create a product prototype, but in order to have a pragmatic prototype that can serve different purposes, it is wise to hire a good product prototype development company. A good product prototype development company has experience, knowledge to perform an extensive research, and proper technology and equipment that help create accurate product prototypes.

When it comes to product prototyping, a product prototype development company usually creates Alpha and Beta prototypes. What is the difference between alpha and beta prototypes? Well, alpha prototypes are product prototypes that are tested internally by the prototype development company, and such prototypes usually have a lot of flaws. Beta prototypes, on the other hand, are more like the final product with more functions. Beta prototypes are normally tested by potential consumers or the general public. Here are some more details on alpha prototypes and beta prototypes:

Alpha Prototypes

Alpha, the first alphabet in the Greek language, is used for the first testable prototype variant of a potential product. Testing of the alpha prototypes is usually carried out by the product prototype development company itself, but sometimes, the company also recruits outside volunteers to test the alpha prototype.

At the alpha stage, the product prototype can have substantial flaws or missing functions, unfinished documentation and it may even require a special environment in order to operate or function. Alpha testing can go through many iterations, and the prototype variants may add or subtract certain working features while the prototyping experts fix the flaws and make alterations based on the test feedbacks.

Once the alpha prototype is fairly functional and closely resembles the envisioned product, it moves to the beta testing.

Beta Prototypes

Beta prototypes of a potential product are usually much closer to the final product than alpha prototypes. These product prototypes are, in most cases, tested by the prospective consumers as well as general public.

A beta prototype is typically an augmentation of an alpha prototype – meaning it has all the functions in place that are expected for the final product. The beta prototype also has fewer flaws than the alpha prototype. The documentation is almost complete or close to complete, and the prototype is usually ready to perform or operate in the real-world environment without any assistance.

Beta testing is usually shorter than alpha testing. The reason for this is that the beta testing is usually designed to identify the minute, last-minute issues before the envisioned product is launched in the market to the actual consumers.

Product prototype development, including alpha and beta, is important. The success of the envisioned product predominantly relies on the prototypes. If you are seeking for a good product prototype development company that can help develop definitive alpha and beta prototypes, then GID Development Corporation is worth considering.

GID Development Corporation is a product design, product development, and product prototype development company in California, USA. Using their years of experience in product prototyping and cutting-edge technologies, like the 3DEXPERIENCE platform from Dassault Systèmes, GID Development Corporation can help create accurate product prototypes for products with electronics, products with imbedded software, electromechanical products, medical device products, and many other types of products. Aside from new product design, product development, and product prototyping, GID Development Corporation also provides a whole lot of other services that help take a product concept to reality and into the hands of prospective consumers.

To learn more about GID Development Corporation, visit http://www.gidcompany.com/.

GID Development Corporation currently offers a free, 15-minute telephonic conference for those who have questions regarding new product design, product development and product prototyping. Those who are interested can call Patrick McCarville at 714.528.2482 between 8:00 AM to 5:00 PM PST.

8 Steps to Take your New Product Idea from Concept to Consumers

Product Design & Development
8 Steps to Take your New Product Idea from Concept to Consumers 5.00/5 (100.00%) 1 vote

steps involved to bring a simple product idea to life and take it to the market, i.e. to the intended consumers. If you are an innovator with a solid new product idea, wanting to materialize your brilliant product concept, then here are 8 steps that you need to heed and follow.

Step 1: New Product Concept

This step usually consists of rough sketches of your new product idea. If you have not put your product idea or thought, on the papers yet, then you should immediately do so. Doodle rough sketches of your concept. Along with sketches, it will be very helpful to furnish some information about your product. Write down what your product is, what features it will have, how the consumers will use it and so on. If you have knowledge of computer, then prepare the rough sketches and note down the info about your product in a good computer application.

Step 2: Extensive Research

After drawing rough sketches and writing down info about your intended product, you might now have a good overall idea about the new product. Now perform a market research: is there any demand for your new product? Whether any similar product or products exist in the market? If similar products exist, how is your new product going to be better? What region will be profitable? You need to answer such questions in order to create and launch a successful new product.

Step 3: New Product Design Development

After gathering valuable info from an extensive market research, you can proceed to develop feasible product designs for your new product. New product design can be complicated; you need to answer several questions in order to create a viable product design for your new product:

  • What are the functions of my products?
  • Will it withstand rough use?
  • Will it be re-usable?
  • Can the product be developed at a reasonable price?
  • For mass manufacturing, will the manufacturing process be easy? Does the product contain multiple parts?
  • What will be the quality of the product?
  • From which materials can the new product be made?

All these questions and more need to be answered while creating new product designs for your product.

Step 4: New Product Prototype Development

When you get a viable product design, you can then proceed to create prototypes based on the design. A prototype is the first tangible form of your new product idea. You can see it, touch it and actually feel it. A product prototype can be as simple or as complex as you want. With a product prototype, you can actually get a complete picture of your new product. It also helps attract potential stakeholders, and eventually, the capital that is needed for mass manufacturing. Product prototype development in the past was expensive; however, with the advent of new technologies, for instance, Dassault Systèmes’ 3DEXPERIENCE platform, new product prototype development is now cost-effective.

Step 5: Testing & Feedback

This is a very important step. Once you have a solid product prototype, you can perform various tests on it. Test it to see whether it works the way it is intended to work. You can also test its sturdiness. After testing the prototype, give it to a group of potential consumers and see how the consumers react. The group of potential consumers will also give valuable feedback, which you can implement before developing and launching the final product. If certain tests fail, or if there are certain features that need to be added, you can go back to Step 3 and Step 4. Thereafter, you again need to perform Step 5. You need to keep on doing this until you achieve a well-accepted product prototype.

Step 6: Mass Manufacturing

Once you have a well-accepted product prototype, which has passed tests and has all the features that the potential consumers had suggested, you can proceed to mass manufacturing. For mass manufacturing, you can go to an already established manufacturer, or you can set up your own production facility; it all depends on the capital you have.

Step 7: Quality Test, Packaging, and Branding

The final product needs to pass through various quality tests. The final product should be flawless in terms of quality, design, and functionality. While the final product is going through quality tests, you need to come up with suitable packaging for the product. You cannot simply give a bare product to the consumers. You need to have a proper package for your product. Along with the packaging, you also need to develop a brand name of your product. You need to come up with unique, enticing logos for your product. Further, you also need to develop certain promotional items for your new product. Advertising and publicity are also necessary in order to let the consumers know about your new product.

Step 8: Launch

Finally, it is time to launch the product in the market. By now, you will already have enough stock of your product. Arrange for the proper channels for your product distribution. You will also need to arrange or set up proper outlets where you can sell your product.

Well, that is it. These are the steps that you need to heed and follow to bring a new product of your own into the market. Mind well, these steps may look simple, but they are not. It requires considerable time, effort and resource. While you can do these all on your own, there are certain product design and product development companies that can help you out. For instance, GID Company can help you materialize your idea, and also help take your new product to the potential consumers.

GID Company is a product design and product development company based in California, USA. They have numerous years of experience in new product design and product development. Whether it is new electromechanical products, medical device products, products with electronics, products with imbedded software, or any other types of products, GID Company can design, develop, and deliver it to the market.

Learn more about GID Company by visiting http://www.gidcompany.com/.

GID Company is also offering a free 15-minute telephone conference with one of the product design and development veterans, Patrick McCarville. You can call Patrick at 714.528.2482 between 8:00 AM to 5:00 PM PST.

Essential Tips on Prototyping Your New Product

ProductPrototypeDevelopment
Essential Tips on Prototyping Your New Product 5.00/5 (100.00%) 1 vote

The most important step that follows after conceiving a brilliant new product idea and creating a viable product design is developing a product prototype. A product prototype is a tangible form, that is, which you can see, touch, feel and sense, of your product concept.

Product prototype development is the best thing you can do in order to take your concept further. A product prototype not only gives you the idea of how your product will look and feel like, but it serves other important purposes as well. For instance, you can use your prototype to impress potential stakeholders and generate finance in order to take your product further to the market. A product prototype also helps you identify design or function flaws and rectify them in the early stages, before bulk manufacturing. Not to forget, a product prototype also serves as an excellent sample or model on which you can try different things to make the final product even better. Overall, product prototype development is an essential step that you, as an entrepreneur or innovator, should not overlook.

Here are some tips on prototyping your new product

Determine the type of prototype you require:

It is extremely important to understand the purpose of your product prototype.

  • Is it for you to evaluate the feasibility of your product design?
  • Is it for you to determine whether the product will be practical and/or lucrative for bulk manufacturing?
  • Is it to impress potential stakeholders and get funds to take your product further?
  • Is it to just sell on any crowdfunding platform?

Do not spend too much on prototyping

You do not need to spend hundreds and thousands of dollars on product prototype development. Initially, all you have to do is create a simple prototype. Use cardboards or polystyrene foams to make your prototype. You can exclude most aesthetic aspects and functions in the early prototypes. After you achieve what you expected from the prototype, like feasibility for bulk manufacturing or feedback from potential consumers, you can increase your budget for developing a solid prototype with most or all aspects included. For that, you will need to hire a product prototype development company.

Hire a product prototype development company that uses the latest technologies

If you need a solid prototype, which includes most or all functions, find and partner with a product prototype development company. Product prototype development companies use rapid prototyping solutions, such as CAD (computer aided-design) applications, and additive manufacturing techniques, such as 3D printing, in order to develop fully-functional and visually beautiful product prototypes, quickly and accurately.

Go for manufacturing of the final product, but keep it in small batches

There is no need to bulk manufacture until you fully understand the market demand and the acceptability of your new product among the consumers. You also need to derive the profitability of your product. If you go for bulk manufacturing from the onset, you might end up with inventory that you cannot move and is unprofitable. To ensure such a thing does not happen, manufacture your product in small batches initially.

If you need assistance with new product prototype development, then GID Development Corporation (http://www.gidcompany.com/) is here to help. A product prototype development company in California, USA, GID Development Corporation has vast experience in product prototyping. They use rapid prototyping solutions, like Dassault Systèmes’ 3DEXPERIENCE platform, which includes CATIA V6, SOLIDWORKS, ENOVIA, SIMULIA, GEOVIA, and other apps, to develop new product prototype quickly, accurately, and economically. Get in touch with them to learn more about new product design, product prototype development and product development.

GID Development Corporation is currently offering a free 15-minute telephonic consultation with one of the product development experts, Patrick McCarville. Patrick is available at 714.528.2482 between 8:00 AM – 5:00 PM PST. Call Patrick today!

How to Create your Product Prototype

How to Create your Product Prototype
How to Create your Product Prototype 5.00/5 (100.00%) 2 votes

If you have a concept of a new product in mind, the most important thing you can do to see whether it will work is to bring that product idea to life. In order to bring that product idea to life, the best and the safest approach is to create a prototype – a tangible representation of a concept or product.

Product prototype development may or may not be complicated, but it is certainly time-consuming. However, considering the end result, a physical realization of your product concept, it is certainly worth it to spend some time and efforts for product prototype development.

Here is a list of steps for how to create your product prototype:

Prepare a clear drawing of your innovation

It is all right to scribble your innovation on a tissue paper or a rough piece of paper – product ideas can strike at any time! However, make sure to keep that doodle safe until you make a clear drawing somewhere safe. From your rough sketch, draw it out clearly in a sketchbook. Include every detail, like how it will look, its dimensions, its surfaces, etc. Further, write down the list of features that your product will have.

If you know how to use CAD (computer-aided design) software, it will be very helpful to make a CAD sketch as well. It is obvious you will have plenty of drawings; hence, make sure to date them as it may assist you later on when it comes to patent ownership issues.

Build a non-working version

Using foam, plastic, wood, metal or any other materials you are comfortable with, create a non-working model of your innovation. A non-working model will let you gauge the size and form better than clear drawings that you drew in your sketchbook. A non-working model does not have to be perfect or pretty-looking, but it should resemble like your product as much as possible.

Create a plan for how to develop a working model

Once you got the non-working model, it is time to start thinking about how to create a working model. Consider the size, function and usefulness of your product. Think whether it will be of plastic, rubber, metal or some other material. Take into account the product’s important physical qualities. Think about its strength, flexibility and tactile aspects, for instance, its surface’s smoothness.

Make an exhaustive list of all the things you will need. Refer it as many times as possible to ensure you have not left out anything. This list will be very helpful when you decide to go to a product prototype development company; they will use this list as a guide for determining the cost of new prototype development.

Getting your working product prototype manufactured

Creating a non-working model of your innovation can be easy, but developing a fully functional prototype can be challenging. For that reason, you will need to reach out to a reputable product prototype development company. While working with a product prototype development company certainly is an excellent and sensible idea, there are a couple of things to keep in mind when partnering with them.

Sign a non-disclosure agreement (NDA)

Before sharing your drawings, it will be in your best interest to get the NDA signed by your new product prototype development company. As the term suggests, it will prevent the company from sharing your concept with third-party or someone else.

Describe your concept thoroughly

Prototype development companies are experts; however, it is essential to describe your idea as clearly and thoroughly as possible to them. Tell them what you think, explain them about how your product should look like, how it should work, who can use it and so on. This will not only help them provide you an accurate quote, but it will also help them understand what you actually want and what you actually expect from them.

If you are looking for an experienced product prototype development company in California, the GID Company is worth giving a shot. With decades of rich experience in new product design and product development, the professionals at GID Company can help develop exceptional prototypes and test them. They can even help with the enhancement of the prototype and bulk manufacturing of the final product. Call Patrick at 714.528.2482 8am to 5pm PST for a free consultation.

Learn more about GID Company by visiting http://www.gidcompany.com/