ElectroMechanical Products – Get It Done With Development Corporation

ElectroMechanical Products – Get It Done at The GID Development Corporation, USA

Electromechanical product development is not a difficult process but, yes, a bit more complex than ordinary product development processes. It includes the same of sets of manufacturing stages including, conceptualization, designing, prototyping and bulk manufacturing. But, what are exactly electromechanical products?

Electromechanical products can be defined as products with both electrical and mechanical parts. The whole process of electromechanical product development remains the same as the routine product development, the only difference is, realizing and manufacturing of these products necessitates supplementary mechanical and electrical engineering. The process of integrating electrical engineering and mechanical engineering in a product may sound simple, but in fact, it’s a complicated process demanding 100% precision.

The branch of electrical engineering is widespread with in-depth presence in almost every genre of product. It deals with the study and application of not only the electronics and electricity but electromagnetism, as well. While these are some misunderstood topics for a common inventor or a business person, the final products of electrical engineering are all the things that operate on some form of electricity, which we usually see in our surrounding daily activities. This may include products such as power grids to computers to light bulbs to smartphones to spacecraft to automobiles, everything that requires some sort of electricity to operate is a result of electrical engineering.

On the other hand, mechanical engineering is a branch of engineering that is multiple times broader than electrical engineering. This genre of engineering comprises the study and application of thermodynamics, electricity, mechanics, kinematics, material science and structural analysis to name a few. Unlike other branches of engineering, mechanical engineering is also quite difficult for a normal person to understand; however, the final products of mechanical engineering are machines and devices that we find in our surroundings. Most common products in our surroundings that utilizes one or other principles of mechanical engineering are toasters, door locks, automobiles wristwatches, elevators, aircrafts, etc.

In the 21st century, the demand of multipurpose and revolutionary electromechanical products is surpassing every expectation. These list of electro mechanical products involves every product that could make people’s life more comfortable and convenient. Innovators / entrepreneurs have the ideas for awe-inspiring electro mechanical products that could change the way we live and perform our day to day tasks, but conceptualizing and bring those ideas to life is bit complicated or impossible for most of them. Opportunely, there are product design and development companies that help these innovators / entrepreneurs live their dreams.

If you are an entrepreneur or innovator with an idea for electromechanical products, products with imbedded software, medical device products, products with electronics or something similar that can create a buzz in the market, the GID Development Corporation can help.

With more than four decades of industry experience and a significant track record of customer satisfaction, the GID Development Corporation is an American product design and manufacturing company led by industry veterans. Based in California, GID has the in-house teams of product designers, engineers, prototyping experts and project managers to bring ideas to life in the most lucrative manner. For the development of 100% precise product development at reduced cost and time, they utilize the latest technologies, like Dassault Systèmes’ 3DEXPERIENCE platform that includes CATIA V6, ENOVIA, 3DVIA, SOLIDWORKS, 3DEXCITE, and more.

They have the team, technology and vehemence required to the development of revolutionary electromechanical products, products with electronics, medical device products, products with imbedded software, or anything else, GID Development Corporation will “Get It Done.”

Learn more about GID Development Corporation and how they can help you bring your ideas to life Call Jim Grimes at 714-323-1052 between 8:00 AM to 5:00 PM PST for a free consultation. Checkout our product Willis Auxiliary Power Systems.

Plastic Product Manufacturing – Tips to Find the Best Product Development Company

Plastic Product Manufacturing – Tips to Find the Best Product Development Company

If you are dealing in plastic products or parts, then you don’t need to manufacture those parts or products on your own. You can hire a plastic product manufacturing company to design and develop custom plastic parts for the optimum functioning of your business. There are product development companies in the United States and beyond the borders of the United States to help inventors and businesses with what they require and how much they require.

However, not all product manufacturing companies are reliable and professional when it comes to manufacturing plastic products from scratch. It will be in your favor if you choose a plastic product manufacturer with adequate experience, workforce, and technology to transform your idea into a money-making product. Here are a few tips to help you find a plastic product manufacturing company that will fulfill your budding plastic parts demand.

If you are a startup, then you should focus on the type of materials the company uses. Every product development company is different from each other, similarly not all plastic product manufacturers are going to make use of all types of raw materials to develop plastic products. Some manufacturing companies may possess expertise in creating plastic products using raw materials such as polyurethanes, whereas others may prefer polyethylene terephthalate, polyamides (nylon), polyvinyl chloride, etc. to develop new plastic products. Every raw material has its characteristics, each suitable for a specific purpose; hence, partner with a company that can recommend and handle the specific plastic material that you want for your parts or products.

Some plastic product development companies offer additional services to help inventors. The supplementary services can help you overcome any unwanted product development blunders. Some product manufacturing companies may also assist with rapid prototyping to help you test the feasibility of the concept. Partnering with such a versatile product development company can be worthwhile for you.

Whether you are a startup, a mid-sized business, or a big brand with an international presence, teaming up with a reliable plastic product manufacturing company procures tons of benefits for you. These include plastic products for vivid industries such as agriculture, transportation, medical, sports equipment, automotive, and retail to name a few.

If you are in search of a reliable plastic product manufacturing company in the United States, then the GID Development Corporation is worth considering. Propelled ahead by the team of the most skilled and experienced industry professionals, GID offers exceptional designing services, prototyping, manufacturing, and services in between. Call Jim Grimes at 714-323-1052 8 am – 5 pm PST for a free consultation.

Product Design – 3 Reasons Why Second Opinion Design Review is Good Before New Product Development

Design Review

New product development being a complex and critical process, it’s always a good idea to get a second opinion product design review before you opt for product development. Whether you are looking forward to develop products with electronics, electro-mechanical products, products with imbedded software, medical device products or anything else, a second review certainly helps you save your time and money.

The GID Development Corporation shares with you some of the reasons a second opinion is a smart move when it comes to custom / new product development.

Big Brands Always Get Second Opinions on Product Development:

It’s a universal fact that a new line product hitting the shelf is reviewed by dozens of engineers and clears multiple quality checks. To avoid any manufacturing complications, big brands across the globe ensure that all engineers designing new products get lots of second opinions from other designers.

In the product design and development industry, second opinions are termed as design reviews. To ensure a fruitful second review, design engineers are required to present their new product design to other designers. This step certainly helps the designer to identify minor design issues that could lead to a major error.

Another reason why large companies emphasize on the second opinion design reviews is because electronic products, products with imbedded software and other modern day products are complex in nature, and regardless to the engineer, mistakes are almost made when designing anything complex. Therefore, it is in our favor to take every possible step to minimize the risk of design mistakes.

Second Opinions Will Reduce Your Prototyping Costs

Product prototype development is yet another expensive step involved in the process of new product development; therefore, being a responsible entrepreneur / inventor, we need to make sure that the design is accurate before prototyping.

Most product manufacturing companies prefer at least three revisions to get products ready for market; however, the number and severity of the changes required will be considerably decreased with design reviews. A second opinion design review before prototype development is one of the best ways to reduce manufacturing cost and time.

Your Wireless Design is Likely to Be Junk Without a Second Opinion

Manufacturing wireless products like WiFi, Bluetooth, or GPS is a job of high precision, and unfortunately, 75-85% of engineers get it wrong when it comes to designing wireless parts. Some mistakes are so major that the prototype may not work at all or may function in a very limited fashion.

Designing multifaceted products with imbedded software, electro-mechanical, electronic parts or something similar is quite different than ordinary products. Therefore, if you are planning a product with multiple functionalities, then you should get a second opinion.

To Conclude

The advantages of second opinion design reviews carry over into all the aspects of designing and manufacturing a new product. The opinion of multiple design veterans is always a smart move.

When it comes to new product development, hiring a product development company with years of experience and teams of engineers having specialization in different engineering fields is a wise move.

If you just had that your eureka moment, then the GID Development Corporation can certainly help you bring your ideas to life. Being one of the leading product manufacturing companies in the United States, GID offers A-Z services, from industrial design services to taking the new product to the consumers and everything in between. They have an in-house team of engineers, product designers, prototype developers, and other professionals that can help bring any idea to reality.

Along with the above mentioned reasons to partner the GID Development Corporation for your next product development venture, the NDA (Non-Disclosure Agreement) policy of the company is quite impressive. The company and its people are highly committed towards the Non-Disclosure Agreement (NDA) and protect their client’s intellectual property rights for their new product idea prior to their disclosure of any pertinent information. At the GID Development Corporation, a Non-Disclosure Agreement is placed at the apex of their product design and development process.

A Non-Disclosure Agreement covers customer-centric points such as;

  1. A complete contact information of both parties involved.
  2. Definition of Confidential Information
  3. Ownership of Confidential Information
  4. Phased Release of Discloser’s Confidential Information
  5. Term of the Agreement
  6. Termination Terms and Conditions
  7. Injunction relative to Recipient’s failure to perform
  8. Changes must be in writing and agreed to by both parties
  9. NDA does not constitute a partnership or joint venture
  10. NDA will be governed by the laws of a given State of the United States of America
  11. Brief Description of the idea and/or product
  12. Dated Signatures of both Parties

Armed with a properly crafted and executed NDA, the inventor can now freely divulge their idea and discuss it in detail while revealing their expectations for its success. Being a competent and professional design & engineering Firm, GID Company always proceed in this manner by insuring the client is protected at the start of Design & Development Process for a new or improved product idea.

To know more about NDA or to discuss your product idea, Dial 714-323-1052 and ask for Jim Grimes or visit their website https://www.gidcompany.com/.

Product Prototype Development – Why Its Necessary?

Product Prototype Development – Why Its Necessary

Undoubtedly, product prototype development is one of the most necessary steps when manufacturing a new product from scratch. But what is a product prototype? In simple terms, a product prototype can be defined as a tangible version or a ready to test version of a product to be developed – which you can touch, feel, and see. A prototype lets you test your concept in the primary stages before you move on to the bulk manufacturing phase and offers you an opportunity to make your final product more successful and customer-centric.

Its 2016, and the importance of product prototype development has increased with every passing day. It is necessary because, it allows you to feel your concept, it lends you an opportunity to attract potential investors and customers, and most importantly, it allows you to test your concept before you proceed towards to final manufacturing phase. Whether you are planning to develop an electromechanical product, a product with embedded software, a plastic, metallic, or fabric product, or a medical device, there are tons of advantages of getting a product prototype made.

Here are some of the most common reasons that justifies, “Why Product Prototype Development is Necessary Before New Product Development”, and they are as follows;

Product Prototype Saves Precious Time:

When you consider launching a new product into the market, time is a most important factor. You need to manufacture and launch your product in the market before anyone else does it. Product prototype development eliminates much of the time that is required or unnecessarily wasted to create patterns, custom tools, and multiple molds for conventional molding. It lends you an opportunity to save time that might be wasted between the initial designing and the analysis, eventually reducing your product’s time to market. A product prototype can be developed easily to test features, performance and usability that would have consumed more time by using the traditional method. Rapid prototyping saves your time; hence, you can get your product in the market fast before your competitors.

Product Prototype Opens Up Innovation Opportunities:

Another crucial benefit of prototype development is that you or the product development company you hire have the freedom to create mock-ups that are complex in surfaces and shaped without worrying about precision. As you get multiple opportunities to modify (both functionally and aesthetically) your concept before final manufacturing process, rapid prototyping takes the creativity to the next level.

Product Prototype Saves Your Money:

In terms of time and money, manufacturing a new product from scratch is always a matter of risk. Real innovation always comes with a risk of failure. Thomas Edison once said, “We now know a thousand ways not to build a light bulb.” Rapid prototype development saves your hard earned money, because it helps you identify and weed out the approaches that don’t work.

Product Prototype Reduces the Risks of Errors:

Simple looking product errors can lead to complex problems in a long run. Rapid prototyping eradicates the probabilities of such tiny errors that can lead to product failure. A product development company can recognize errors and faults, and make fast modifications before bulk manufacturing takes place. Prototyping ensures that the final product is designed and developed as per our expectation. The success of the envisioned product predominantly relies on the prototypes.

If you have a product idea and are looking for a product prototype development company that can help you create a final prototype, then GID Development Corporation can certainly help.

Based in California, USA, GID Company is a product design, product development, and product prototype development company. Whether you are planning to develop products with electronics, products with embedded software, electromechanical products, medical device products, any other types of products, GID Development Corporation has the skills and vehemence to bring your concept to life. Along with over-the-top designing and manufacturing services, GID also offers promising prototyping services that help take a product concept to reality and into the hands of prospective customers.

To learn more about GID Development Corporation, visit https://www.gidcompany.com/ or call Jim Grimes for a free consultation at 714-323-1052 from 8 AM to 5 PM PST Monday through Friday.