Tag Archives: Prototype Development

3 Top Product Design Tips

Product Design Tips
3 Top Product Design Tips 5.00/5 (100.00%) 1 vote

While all the steps in new product development are important, one particular step demands more focus. It is the product design step. One of the primary steps in new product development cycle, product design of the conceived product factors toward the success of the final product. Product design affects the manufacturability as well as the cost of manufacturing too! For that reason, a little more attention is needed when designing a product.

Here are top three tips to consider when designing a product. The tips are based on our years of experience in the field of product design and development and are overall the best tips to take into consideration as you begin your venture into new product development.

Keep it Simple

Keep the design of your conceived product as simple as possible. The best product designs are those that just form a seamless connection between function and design. If the design of your product is complicated, it will be difficult to manufacture it. It will also increase the cost of manufacturing. Apart from these issues, if such a complicatedly-designed product is brought into the market, the potential customers will probably alienate it, resulting in total failure of the product. The goal of a good product design is to entice customers with an ergonomically-friendly design that seems easy to use.

For product design, it is best to team up with an intelligent team that can create a simple, yet attractive and functional design that allows easy and economical manufacturing.

Research

There is no need to reinvent the wheel! In fact, customers often prefer that you do not reinvent the wheel. Before designing your product, it is necessary that you conduct an extensive market research. Find out the competitors’ products that are on the market. See which features the customers like and dislike for those products. You would want your product to have only likable features – right?

When conducting the research, note down all the new features and functions you can implement in the design of your conceived product. Also, keep in mind that you do not change certain things that are familiar to the customers. For instance, it would be a terrible idea to change the order of the accelerator, brake, and clutch (ABC) in a car. People are already familiar with the default pattern, and changing it will result in instant rejection.

Prototyping and Testing

Although, product prototyping and testing are two entirely different steps that come later down in the product development cycle, they do have a connection with the product design phase. Product prototyping and testing make it possible to detect flaws or defects in the product design. Therefore, you need to create prototypes so that they can be tested to find flaws. Once the flaws are detected, you should eliminate them and then create a new product design. Based on the new product design, build and test the prototype again. You need to repeat this process until you achieve a definitive product design.

Today, because of the advanced technologies, prototype development and testing have become virtual, in a 3D computer-generated world. Nevertheless, there are still instances when you need to develop and test physical prototypes to detect the flaws and make the final product better.

You will also need to build product prototypes to give it to people for their suggestions. Based on their suggestions, you may need to alter the product design and create new prototypes again. Of course, this is a tedious process, but it is vital to achieving a flawless product design.

There is nothing easy about product design. For successful product designs, massive skills and experience are needed; skills and experience like GID Development Corporation has.

We are one of the leading product design companies in California, USA. We have decades of experience in the field, and have delivered thriving product design solutions to our clients (inventors) in the US and worldwide.

Along with product design, we provide rapid prototyping, product development, product manufacturing, and other product fulfillment services. No matter how complex the product concept is, we will help you realize it. To learn more, visit http://www.gidcompany.com/.

Have any questions regarding product design? We are offering a 15-minute, FREE telephonic consultation. Just call Patrick at 714.528.2482 between 8:00 AM to 5:00 PM PST.

Product Prototyping – 3D Printing, CNC Machining & Plastic Injection Molding

Product Prototype Development
Product Prototyping – 3D Printing, CNC Machining & Plastic Injection Molding 5.00/5 (100.00%) 1 vote

Prototype development of your conceived product is vital. A product prototype is the first physical form of an imagined product idea. It enables the inventor to actually touch and feel the perceived product. It also allows the inventor to perform various tests and make necessary changes to make the final product better. Not to forget, a product prototype is a proof of concept, enabling the inventor to pitch to potential stakeholders about the conceived product and attract more funds for the mass production.

When it comes to product prototype development, it is helpful to consider the various tools available and the different processes used for making different parts of a conceived product. Product prototype development can be carried out using one of the following three methods: 3D printing (additive manufacturing), CNC machining (subtractive manufacturing), and plastic injection molding.

3D Printing

3D printing or additive manufacturing is one of the rapid prototyping techniques that constructs 3D objects by successively depositing material in layers such that it becomes a predefined shape. In the past few years, contemporary 3D printing has been very successful for rapid prototype development, but it is gradually starting to make its impact on the product manufacturing realm as well.

CNC Machining

CNC machining or subtractive manufacturing is a technique that constructs 3D objects by successively cutting away the material from a block of solid material. Typically, a CNC machine is employed in order to cut away the material and give a definite shape. Modern CNC machines utilize several tools and cut at three axes to nine axes such that they minimize the need for operators to flip the block. One of the cardinal benefits of CNC machining is the ability to construct predefined metal parts swiftly and accurately. 3D printing, in the case of metal, does construct parts accurately, but it is relatively slower than CNC machining. Therefore, for those product prototypes that require both plastic and metal parts, it is useful to use 3D printing for plastic parts and CNC machining for metal parts.

Plastic Injection Molding

Plastic injection molding is a popular technique that constructs an object by injecting the material, with high pressure, into a mold. Once the product design engineers finalize the product design, definitive molds are made from either steel or aluminum, which are then fitted on the injection molding machine. The material is then fed into the machine, which passes through the mold and ejects as the predefined shape.

Which Method Should You Employ?

Each method is better suited for different situations. For instance, suppose you want to build a single product prototype just to get the feel of your conceived idea, run basic tests, and/or prove your concept to potential stakeholders. In such a case, if it is all plastic, you can employ 3D printing. If it is all metal, you can employ CNC machining. If it is an amalgamation of both plastic and metal, then you can employ 3D printing to produce plastic parts and CNC machining to produce metal parts. You can then assemble the plastic and metal parts to form the prototype and do whatever you wish to do with the prototype.

Now, suppose you want to create several identical product prototypes, which contain both plastic and metal parts, for consumer testing and market research. In such a case, you will need to employ plastic injection molding for plastic parts and CNC machining for metal parts. Plastic injection molding enables you to produce a moderate quantity of parts quite swiftly and economically. Once you have both the plastic and metal parts, you can assemble them to form several identical prototypes, which you can use for consumer testing and market research.

Despite the popular methods available, product prototype development can be tough, especially if you do not have a definitive product design for your conceived product. Besides, testing product prototypes and making them better are also some of the difficult challenges, which you may not be able to face it on your own. For that reason, it is sensible to partner with a product development company that employs different rapid prototyping techniques, including 3D printing, CNC machining, and plastic injection molding.

GID Development Corporation is a leading product design and product development company in the US. They offer quick and economical product design, rapid prototyping, product development, and other product fulfillment services to inventors in the US as well as across the globe. When it comes to product prototype development, experienced industrial engineers at GID Development Corporation first utilize the 3DEXPERIENCE platform from Dassault Systèmes, which includes tools like CATIA V6, 3DVIA, BIOVIA, SOLIDWORKS, etc., to create and test product designs virtually. After achieving a definitive product design, the skilled industrial engineers employ 3D printing, CNC machining, plastic injection molding, or a combination of these methods to produce accurate product prototypes. The engineers at GID Development Corporation also have the experience and in-depth knowledge that help them test the prototype and make it better.

So if you need help with product prototype development, just contact GID Development Corporation. Whether it is a simple prototype development, like for sports products, or an intricate prototype development, like for complex electromechanical products or medical products, GID Development Corporation will “GET IT DONE!”

To learn more about the leading product design and product prototype development company in the US, GID Development Corporation, visit http://www.gidcompany.com/.

Have any queries regarding product prototyping? Just call Patrick at 714.528.2482 between 8:00 AM to 5:00 PM PST, for a 15-minute FREE telephonic conference. He will answer to various questions regarding rapid prototyping, 3D printing, CNC machining, and plastic injection molding.

Steps in the New Product Development

Steps in the New Product Development
Steps in the New Product Development 5.00/5 (100.00%) 1 vote

New product development may seem as simple as forming an idea for a revolutionary product, manufacturing it, and putting it on the market, bringing it to the customers. Well, the reality is that new product development is a complex process, which involves contributions from many skilled individuals. New products should not only be useful inventions that can be mass manufactured and sold for profit, but they should also be safe to use, protected by intellectual property rights, and more importantly, be easily marketable.

Here are some steps, explained by GID Development Corporation, a product development company in California, USA, which are involved in new product development.

Germinating Ideas

The primary stage of a product development is coming up with a fantastic idea for a new groundbreaking product. Oftentimes, new products are introduced in the market by first recognizing a specific need in the market and then developing a product to satisfy that need. Sometimes, revolutionary product ideas also occur just by chance or an unusual incidence that triggers the concept in the mind of the innovator.

Researching Plausibility of the Idea

The next stage of the product development is finding out the plausibility of the idea. In other words, the innovator needs to find out the degree of acceptability, usability and the value of the conceived new product. Knowing how well the potential customers will receive the new product is vital. It prevents a lot of time, money, resources and efforts on the development of products that are worthless to the potential customers.

Concept Development

Development, or rather, enhancement of a concept is the essence of new product development. It includes, but not limited to getting a grip on the basics, such as market research, material selection, material costs, product design costs, prototype development cost, overall manufacturing costs, potential profit, target regions, target customers, and so on.

Actual New Product Development

Actual new product development is the stage where the conceived idea and all the researched and concept development data are amalgamated and put into action. A product development company starts with the creation of new product design, using researched data. After the creation of a definitive product design, the company moves on to the development of prototypes. Then, the prototypes are tested, and changes are made until an idealized new product is realized.

Bulk Manufacturing

After realizing an ideal new product from the conceived idea, the product is bulk manufactured. Usually, it is affordable to outsource bulk manufacturing. If the budget is not the constraint, your own production facility can also be set up to bulk manufacture the new product.

Commercialization

The commercialization stage of new product development involves packaging, branding, logistics, warehousing, as well as rolling out the advertising and marketing campaigns. In short, commercialization is a stage of bringing new products to the market and to the potential customers.

New product development is a complex, time-consuming, and arduous process. An innovator cannot tackle the new product development process on their own. Luckily, product development companies, like GID Development Corporation, are established that can help innovators with the entire product development process.

GID Development Corporation is an American product development company based in California. Utilizing their vast experience and the most advanced technologies, like Dassault Systèmes’ 3DEXPERIENCE platform, which includes product design and product development apps, such as CATIA V6, ENOVIA, 3DVIA, SOLIDWORKS, and more, the veterans at GID Development Corporation assist innovators in every stage of new product development. Whether it is the development of medical device products, mechanical products, electrical products, electromechanical products, products with imbedded software, or any other types of products, GID Development Corporation will always thrive.

To learn more about GID Development Corporation, visit http://www.gidcompany.com/.

GID Development Corporation is currently offering a free 15-minute telephonic consultation. Anyone who is interested should just call Mr. Patrick McCarville, one of the pros at GID, at 714.528.2482 between 8:00 AM to 5:00 PM PST.

What to Look For in a Product Prototype Development Company in the USA?

What to Look For in a Product Prototype Development Company in the USA?
What to Look For in a Product Prototype Development Company in the USA? 5.00/5 (100.00%) 3 votes

The requirement for high-quality product prototype development services is as important to inventors as it is to entrepreneurs. Rapid prototyping not only offers life to your concept, but it is also a service that is important at different stages of the product development process. For inventors, product prototype development provides the ability to perceive how a product concept that exists as a drawing or computer model will actually look and feel. For a product development company, a product prototype development allows them to improve the product design before an expensive manufacturing process is initiated.

The industry of product prototype development has noticed significant advancements in technology and manufacturing processes, which in turn, have reduced the cost and delivery time for manufacturing highly precise, functional prototypes. As a result of technical advancements, the use of prototyping has become much more economical and available for all types of businesses. If you are an inventor or manufacturer, finding a product prototype development company in the USA with a wider range of service offerings, then find a company that also offers the following:

Comprehensive Feasibility Studies– A comprehensive feasibility study of your proposed product will empower the prototype development company to help inventors and businesses recognize product, available technology, and manufacturing limitations. A complete feasibility study can help you overcome many unseen product manufacturing problems.

Industrial Design– A product development company that you intend to hire should be well versed in industrial design services. An established company can conduct a design analysis for you and identify problem areas with your parts before you move to the next phase. A thorough product design analysis can save thousands of dollars and valuable time.

Product Development Cost Analysis– A well-planned financial layout for a new product development is priceless. A detailed financial layout will help you raise funds for the proposed product. This kind of analysis may include elements such as product tooling costs, the cost of raw material, cost-per-part breakdown, post manufacturing costs, and an estimation on labor costs. A well-thought-out plan ensures that your product manufacturing process is not interrupted due to financial problems.

Other Areas of Expertise– A product development company should possess expertise in other areas such as contract research and development, proper understanding of industry standards, education and training in the product development industry, knowledge of licensing and copyright laws, and many other areas of specialty research.

In addition to above mentioned characteristics, one more important aspect to look for in a product prototype development company in the USA is a company that has separate teams of skilled product designers, prototype experts, product engineers, and project managers to efficiently handle your requirements.

We are GID Development Corporation keen to help inventors, entrepreneurs, and businesses design, prototype, and launch new products into the marketplace. GID specializes in custom product design and development – with a focus on the concept design engineering, product design for prototyping and manufacturability, marketing presentations, and more. GID can also offer information on patent protection and intellectual property services. To get in touch, please visit http://www.gidcompany.com/contactus

The Importance of Product Prototype Development for Your Innovative Idea

Product Prototype Development
The Importance of Product Prototype Development for Your Innovative Idea 4.50/5 (90.00%) 2 votes

Most inventors of a new product are often so enthusiastic about their latest product that they immediately proceed for a quick production and launch. This strategy, however, is not the right strategy, and it will probably end up in a failure.

You might be wondering, what is wrong getting the new product idea into gear straightaway. You have done the market research and have the right data; you know that there is an excellent market for your innovative product; then why shouldn’t you quickly get your new product to the market and start maximizing your profit? Well, there is a simple and logical reason for not doing this. You do not know yet whether your new product actually works or not. You still do not know whether you can mass manufacture that product efficiently and cost-effectively. Besides, despite knowing that there is an excellent market (based on your market research), you still do not know whether your target consumers will accept the new product. Therefore, the best way to know that your product works and will be embraced by the consumers is to create and test a prototype first.

A product prototype development will take your amazing idea to the papers (you can formally call it blueprints) and then turn it into a real-life working model. A prototype is, in fact, a real working version of your well-thought-out product that functions or does everything the way you want it to do.

An eminent product prototype development company will develop a prototype using precise specifications as if the product was in production; however, they will not mass manufacture it yet, but will produce only a single item. One fundamental aspect of a working prototype is that it has to be designed and developed in such a manner that it represents the product, which can be mass produced before the launch, at an economical price.

 It all depends upon the type of new product idea you have in mind. Let us have an overview of each of the product prototype types.

Mechanical Prototype

A mechanical prototype is one, which we can define as physically made from some material and has some mechanics involved. All the materials used for this type of prototype have to be real materials and the mechanics used should be as per the specifications. These materials and mechanics will later become part of the product ready for the mass production. This type of prototype will help refine the product design and mechanics, and at the same time, help judge the performance of the materials you plan to use.

Software Prototype

A software prototype is one, which does not have any physical characteristics, such as online transaction systems or a simple product, like a website. Creating a prototype software normally involves two stages – developing an “alpha” version and a “beta” version. In the alpha version, the development company will gradually develop various software features. Once they develop the necessary features, they will change that alpha version to a beta version. In the beta version, the development company will perform various tests and adjust the software as per the desired results. Beta versions are often distributed to users in order to get some valuable feedback. Based on the feedback, creating an excellent final software product is possible.

Electronics Prototype

Electronics prototype is one, which involves constructing an electrical circuit using a stripboard, breadboard, and various other electrical components. Based on the theoretical design, a prototype development company will build an actual circuit in order to verify whether the circuit can perform the desired functions or not. To a theoretical electronics design, this type of prototype is a physical platform where debugging is possible in order to achieve the desired results.

Product prototype development is essential for three major reasons:

  1. A prototype serves as a basis for the actual product, which you can introduce in the market with maximum confidence and minimum risk. Besides, once you have a working prototype, you will now at least know that it is possible or viable to manufacture the actual product.

  2. A prototype is a real, feasible thing that can easily excite the investors. With a product prototype and the data from your market research, you can create an excellent business plan that will show the potential of your product in the market to the investors.

  3. A prototype is a working model of your idea that you can use as a basis for various marketing tests. With the working model, you will be able to conduct primary marketing research, which will indeed help you hone your approach to the market.