Categories
Plastic Product Manufacturing

Plastic Product Manufacturing – The Importance of Thermoplastic Materials

When it comes to plastic prototype development or plastic product manufacturing, it is useful to understand which material to use. Typically, there are two types of plastic materials: thermoplastic and thermosetting resin.

Thermoplastic materials are those that can be melted and cured (hardening the polymer material) again and again. There is, of course, a limit to the number of times such melting and curing process can be repeated, depending on the type of thermoplastic material. The point, however, is that such thermoplastic materials can be melted a number of times without degrading the material.

Thermosetting materials, on the other hand, are those that can be melted and shaped only once. After a thermosetting material is cured, trying to melt it again would cause the material to burn, rather than melt. Think of a 2-part epoxy to understand a thermosetting material. Before mixing with the hardener, the epoxy resin is in the liquid state. Once the resin is mixed and dried, it is not possible to heat and melt it again.

When it comes to plastic injection molding, it is easy to misjudge the importance of thermoplastic and thermosetting materials. By the way, both thermoplastic and thermosetting materials can be injection molded. The major difference, when using a thermoplastic or thermosetting material, applies after the injection molding cycle when the molded plastic solidifies. During the molding process, plastic is heated and injected into a metal mold. To get to the cavity of the metal mold, however, the molten plastic first needs to pass through an array of entry points and tunnels known as sprues, runners, and gates. The plastic cools within the mold cavity as well as inside the channels that lead to the mold cavity. The plastic that solidifies inside the channels is not the component or part of the final product. It is just a waste.

Now, what happens to the “waste” during plastic injection molding?

Thermoplastic Materials

If a thermoplastic material were used for injection molding, the waste could be recycled and used again. The solid plastic left within the sprues, runners and gates can be combined with the raw material that goes into the injection molding machine. The same thing can happen with the material from rejected plastic parts. All the waste plastic can be collected and recycled back to the onset of the process. This all sums up into higher efficiency, and eventually means, lower costs of the final product and better margin for the producer.

Thermosetting Materials

If a thermosetting material were used for injection molding, the solid plastic from the sprues, runners, and gates is simply a waste, which has no practical use whatsoever. This means that the cost of the final product will be more.

To conclude, thermoplastic materials offer some major benefits to plastic product manufacturers, consumers, and even the society, as such materials are recyclable. Indeed, when it comes to plastic prototype development or plastic product manufacturing, the manufacturer should choose and use thermoplastic materials.

At GID Development Corporation, along with top-quality product design, rapid prototyping, and product development, we provide high-class plastic product manufacturing services. We are an efficient product development company in California, USA, and provide a comprehensive service so that our clients can take their inventions, to the market easily. To ensure efficient bulk production of the novel inventions, which we help create with our product design, product prototyping, and product development services, we employ popular plastic product manufacturing techniques.

To learn more about us or our services, visit https://www.gidcompany.com.

A free 15-minute telephonic consultation is available. Just call Jim Grimes at 714-323-1052 between 8:00 AM to 5:00 PM PST.

Categories
Plastic Product Manufacturing

Plastic Product Manufacturing – Tips to Find the Best Product Development Company

If you are dealing in plastic products or parts, then it’s not mandatory that you manufacture those parts or products on your own. You can hire a plastic product manufacturing company to design and develop custom plastic parts for the optimum functioning of your business. There are product development companies in the United States and beyond the borders of the United States to help inventors and businesses with what they require and how much they require.

However, not all product manufacturing companies are reliable and professional when it comes to manufacturing plastic products from scratch. It will be in your favor if you choose a plastic product manufacturer with adequate experience, workforce, and technology to transform your idea into a money-making product. Here are a few tips to help you find a plastic product manufacturing company that will fulfill your budding plastic parts demand.

If you are a startup, then it is advisable that you focus on the type of materials the company uses. Every product development company is different from each other, similarly not all plastic product manufacturers are going to make use of all types of raw materials to develop plastic products. Some manufacturing companies may possess expertise in creating plastic products using raw materials such as polyurethanes, whereas other may prefer polyethylene terephthalate, polyamides (nylon), polyvinyl chloride, etc. to develop new plastic products. Every raw material has its own characteristics, each suitable for a specific purpose; hence, partner with a company that is able to recommend and handle the specific plastic material that you want for your parts or products.

There are some plastic product development companies that offer additional services to help inventors. The supplementary services can help you overcome any unwanted product development blunders. Some product manufacturing companies may also assist with rapid prototyping to help you test the feasibility of the concept. Partnering with such a versatile product development company can be worthwhile for you.

Whether you are a startup, a mid-sized business, or a big brand with an international presence, teaming up with a reliable plastic product manufacturing company procures tons of benefits for you. These include plastic products for vivid industries such as agriculture, transportation, medical, sports equipment, automotive, and retail to name a few.

If you are in search of a reliable plastic product manufacturing company in the United States, then the GID Development Corporation is worth considering. Propelled ahead by the team of the most skilled and experienced industry professionals, GID offers exceptional designing services, prototyping, manufacturing, and services in between. Call Jim Grimes at 714-323-1052 8 am – 5 pm PST for a free consultation.

Categories
Plastic Product Manufacturing

Finding a Reliable Plastic Product Manufacturing Company

All those businesses that use plastic parts are not necessarily going to manufacture them on their own. They need to go to a plastic product manufacturing company to source their plastic products need. The plastic product manufacturing companies can provide inventors and businesses what they want, but there are many companies established, and not all of them are same. It will be in your best interest to make a wise choice when it comes to choosing a plastic product manufacturer. Here are a few tips, which can help you choose a reliable plastic manufacturing company that will cater to your plastic parts demand.

For starters, consider what type or types of materials the company uses. Each manufacturer may differ from one another, and not all plastic product manufacturers are going to utilize all types of materials for manufacturing plastic products. While some may utilize polyurethanes, others may use polyethylene terephthalate, polyamides (nylon), polyvinyl chloride, etc. There are many other common and special purpose plastic materials available, each suitable for specific purposes; hence, make sure the company you may decide to choose is able to recommend and handle the particular plastic material that you want for your products or parts.

The next thing to consider is the location of the plastic product manufacturer. If you are in the US, it is obvious to choose a plastic product manufacturing company in the US. There are several benefits of choosing a domestic company. It reduces the amount of time it takes to receive your products; it reduces the exorbitant shipping costs; it enables you to visit them personally; and so on. A domestic plastic manufacturer also provides quick turnaround when needed. Make sure to visit the manufacturing facility of the company; it will give you an idea about their capability.

Some plastic manufacturers also offer other services that may help you with your overall product design and development. The ancillary services that these plastic product manufacturing companies provide may assist in the development of a design that is going to be perfect for you and your product. Some companies may also help with product prototyping and testing to help you assess the viability of the product and see if any modifications are required. Finding such companies and working with them can certainly be worthwhile for you.

A number of inventors and businesses can benefit by teaming up with a reliable plastic product manufacturing company. These include medical, agriculture, sports equipment, transportation and retail to name a few. You have the option to choose a plastic product manufacturer that predominantly deals only in the manufacturing of plastic products or you can choose a company that, along with manufacturing, provides A-Z services ranging from product design and product prototype development to product enhancement and distribution.

If you are looking for a reliable plastic product manufacturing company in California, USA, which provides A-Z services, then GID Company is worth considering. With extensive industry experience, they provide exceptional product design, prototype creation, product development, plastic product manufacturing and other product fulfillment services. Jim Grimes at 714-323-1052 8am to 5pm PST for a free consultation.

To learn more about GID Company, visit their website https://www.gidcompany.com/.

Categories
Plastic Product Manufacturing Product Manufacturing

How to Summarize a Plastic Product Manufacturing Strategy

If you are planning to develop a new plastic product for your customers, then a clear and focused plastic product manufacturing strategy is critically important to ensure success, and without a well-defined strategy, new product development will tend to stall or even fail. A well-defined product development strategy lends you opportunities to analyze and overcome unexpected concerns. Moreover, it also offers direction and action plans, prioritizes and aligns activities, defines accountabilities and enhances communication and commitment.

Plastic product manufacturing industry changes rapidly, and for entrepreneurs to thrive in this environment, they have to keep their heads about the day-to-day business and spend time looking and listening to the changes that are happening in technology and business. A well-versed new product development strategy can avoid waste of time, money, and resources. It will not only help you organize and manage the entire product manufacturing process, but it will also help you in capturing your customers’ views and expectations, and strategically design and resource your new product development project.

Why do I need a Product Development Strategy?

According to The GID Development Corporation, California, a well-planned and a well-versed “New Product Development” strategy will aid you in:

  • Understanding your potential market and end users
  • Launch of rewarding new products
  • Manufacturing new products that are more useful, durable and affordable
  • Avoid unnecessary manufacturing expenses
  • Proper use of resources and time frame
  • Avoid business risk and unnecessary competition

Points to Consider While Framing a New Product Development Strategy

What is your product?

A detailed and systematic answer to this question will definitely help you overcome most product development glitches. An answer to this question will keep you and your team focused on a single path and escape new product development pitfalls, including manufacturing too many products at once, running out of resources, and wastage of time and money.

What do your end-users expect from your product?

You are manufacturing the new products for your customers; hence, their likes, dislikes, and expectations should be kept at the top of the list. To create a rewarding new product manufacturing strategy, you require an in-depth understanding and knowledge of what your customers want. A new product development strategy summarized based on a strategic, determined, and targeted approach will ensure success for you and your products.

What about the time frame?

Manufacturing new plastic products from scratch is a time-consuming task as well as equally trying; hence, don’t make any decision in the hurry or in frustration. Spend adequate time to conceptualize your idea, product design, product prototype development, and more. Your purpose of manufacturing new products will help you define manufacturing time and your deadlines for execution. Be attentive and accurate.

What are the key concerns?

As stated in the above paragraph, plastic product manufacturing is not an easygoing job. There are thousands of questions to be answered and hundreds of processes that are needed to be handled professionally. Therefore, always focus on key concerns such as product design, price, features, etc. to ensure your product development process moves in a straight path.

Need Help! Call Jim Grimes

The GID Development Corporation is an American plastic product manufacturing company helping small and mid-sized entrepreneurs in realizing their dream of launching a new product. If you have any questions related to plastic product development, then call Jim at 714-323-1052

Categories
Plastic Product Manufacturing

Characteristics of a Reliable Plastic Product Manufacturer in the USA

Finding and working with the best plastic product manufacturer ensures that the first impression of a product is the best it can be. A professionally developed plastic product can make an attractive display, as well as a product easy and safe to use. Working with a full-service product manufacturing company helps you develop high-quality plastic products that are durable, reusable, recyclable, and FDA-approved for use with foods (if you are planning to develop a plastic product such as a food container).

On the other hand, hiring an unprofessional manufacturer can lead to unfavorable consequences such as late deliveries, missed deadlines, sub-par quality or even unfortunate dilemmas at the manufacturing plant that can leave your company in a lurch if the manufacturer can’t or won’t make good on its promises. So for the safety of your idea and its future, it is advisable to contract a manufacturer having adequate experience and tools for bringing your idea to life.

Do you know what are the characteristics of a reliable plastic product manufacturer? Don’t know? Here are the top five characteristics to look for in a product manufacturing company before you hire them for any of their development services, and they are as follows:

In-House Team of Designers and Engineers

You may have your own team of professionals, but it’s best to work with a product manufacturer that has its own team of in-house product designers and engineers who can work with you to come up with a prototype for every part you need. These professionals have years of industry experience that helps them make correct decisions for you. Moreover, these professionals can recommend alternative manufacturing processes of development and offer design assistance so that you are provided with a premium quality product every time. Another advantage of working with a manufacturer having an in-house team of designers and engineers is their ability to solve the problems. They are amazing as trouble-shooters, reducing downtime and ensuring your manufacturing process won’t be delayed any longer than absolutely necessary.

A Variety of Manufacturing Techniques

Your company probably is in need of parts or components manufactured using an injection molding method; however, what if parts or components manufactured using other techniques is required? Is your company capable of manufacturing plastic products using other molding methods as well? In order to sustain the competition and to satisfy the customers coming from different sectors of the market, it is best to hire a new product development company having experience in more than one manufacturing technique.

Round The Clock Manufacturing Capability

It’s an active world where business and customers never sleep. The plastic product manufacturer you opt to hire should be able to routinely run three shifts in the event that you need a rush job or have an unexpected amount of order to fill. If your existing manufacturing partner works only one shift, what will they be able to do for you when you require more plastic parts in limited time?

Stellar Customer Service

Plastic product manufacturing isn’t an industry known for its exceptional post-development services; however, that doesn’t mean you have to face problems such as unanswered phone calls, lost emails, and messages or any other embarrassments that can slow down product manufacturing rate and generate problems through misunderstanding. Before you hire a development company, don’t forget to include a clause regarding customer service. Do they answer your call in a timely manner? Do they answer it right? Are they polite on the call? Were you able to talk to the right person? Were they pleasant and personable?

Multiple Facilities

Plastic product manufacturing is a risky job, and you cannot deny any possibilities of an industrial accident, a fire or any other errors that would need closing the facility; however, it can happen. This could be a costly affair for you and your business. If the plastic product manufacturer has an additional facility, they can continue to supply you with the parts or products you require for your business by using a secondary facility and working extra shifts.

If you find a plastic product manufacturer that fits all of the criteria above, then your project is in safe hand. You will always be served with the best practices and excellent support.

The GID Development Corporation is a leading plastic product manufacturer for all manufacturing needs with more than four decades of experience. For more details visit our official website www.GIDCompany.com or call Jim, President at the GID Company, today at 714-323-1052 for a free consultation.

Categories
Product Manufacturing

6 Simple Steps to Find a Product Manufacturing Company in USA

As an entrepreneur, you know very well that in order to overcome the competition and to thrive in a competitive market, you have to be the best brand experience for your end-users. In the past few years, every industry is experiencing great waves of product manufacturing and marketing change. This leaves every business, small or large alike, with the task of finding the right product manufacturing company that can manufacture lucrative products for their potential customers in the most efficient and effective way possible.

Being an established product manufacturing company in the USA, GID has compiled a checklist for you to help you make the right decision when choosing a product development company.

Step 1: Know your bottom line

The first step is to clearly understand what your concept is and what you wish to develop for your customers. You need to carefully set your business goals, and then plan accordingly to achieve those goals. While at the same time, you should also know how you are going to measure your success. When you know what you need to achieve your objectives, you will be able to conclude whether a product manufacturing company fits the bill or not.

Step 2: Know your cost vs value

This is one of the most decisive factors when it comes to new product development. Pricing is certainly a deal maker or deal-breaker when it comes to hiring a manufacturing company. If you start to cut costs only for saving a few dollars, then you may not reap as much value in the long term when it comes to offering the products you planned for in step one.

Step 3: Identify a solid track record

This step includes a process of identifying a product manufacturing company’s industry presence and the type of projects it has executed until today. Such product development companies have some stellar ideas and new methodologies to consider and implement. The point here is how much a product development company understands your business and industry. Besides, have they effectively developed a similar solution for other clients? Ask the company for some references, client testimonials, and case studies to measure the results.

Step 4: Communicate and learn

There should be no communication gap between you and the manufacturing company you decide to hire, as flawless communication ensures exact product development with fewer hiccups. Persistent communication is necessary because it helps you understand what your product development company is, understanding and doing.

When you start a discussion with them, they should be listening to you carefully, they should be clear to explain what they would be doing, and they should explain how they would be doing it. Most importantly, if you ever get confused or lost in the part of the discussion, they should patiently make you understand the issue.

Step: 5 Know what you want to achieve, be realistic

Before you decide to modify your existing product or plan to develop a new product with the help of a product development company, invest some time and thought into your goals and expectations.

What are some goals you can reach?

  1. Generate more leads
  2. Increase sales
  3. Improve product or brand awareness
  4. Be “in touch” with your customer base

Step 6: Know your strategy

A good product manufacturing company should be offering you a clear, concise product development strategy. A good strategy will give your business a strong sense of authority, relevance, and trust. Ask your product development company about their approach towards product design, prototype development, and manufacturing. Ensure that the strategy you frame has the potential to fulfill your business objectives. The strategy should be outlined in such a way that you reach your deadline and stay within the budget.

Want to discuss your next project? Call Jim Grimes today at 714-323-1052 to discuss the feasibility of your concept, please visit www.GIDCompany.com.