Categories
Product Design

3 Top Product Design Tips

While all the steps in new product development are important, one particular step demands more focus. It is the product design step. One of the primary steps in new product development cycle, product design of the conceived product factors toward the success of the final product. Product design affects the manufacturability as well as the cost of manufacturing too! For that reason, a little more attention is needed when designing a product.

Here are top three tips to consider when designing a product. The tips are based on our years of experience in the field of product design and development and are overall the best tips to take into consideration as you begin your venture into new product development.

Keep it Simple

Keep the design of your conceived product as simple as possible. The best product designs are those that just form a seamless connection between function and design. If the design of your product is complicated, it will be difficult to manufacture it. It will also increase the cost of manufacturing. Apart from these issues, if such a complicatedly-designed product is brought into the market, the potential customers will probably alienate it, resulting in total failure of the product. The goal of a good product design is to entice customers with an ergonomically-friendly design that seems easy to use.

For product design, it is best to team up with an intelligent team that can create a simple, yet attractive and functional design that allows easy and economical manufacturing.

Research

There is no need to reinvent the wheel! In fact, customers often prefer that you do not reinvent the wheel. Before designing your product, it is necessary that you conduct an extensive market research. Find out the competitors’ products that are on the market. See which features the customers like and dislike for those products. You would want your product to have only likable features – right?

When conducting the research, note down all the new features and functions you can implement in the design of your conceived product. Also, keep in mind that you do not change certain things that are familiar to the customers. For instance, it would be a terrible idea to change the order of the accelerator, brake, and clutch (ABC) in a car. People are already familiar with the default pattern, and changing it will result in instant rejection.

Prototyping and Testing

Although, product prototyping and testing are two entirely different steps that come later down in the product development cycle, they do have a connection with the product design phase. Product prototyping and testing make it possible to detect flaws or defects in the product design. Therefore, you need to create prototypes so that they can be tested to find flaws. Once the flaws are detected, you should eliminate them and then create a new product design. Based on the new product design, build and test the prototype again. You need to repeat this process until you achieve a definitive product design.

Today, because of the advanced technologies, prototype development and testing have become virtual, in a 3D computer-generated world. Nevertheless, there are still instances when you need to develop and test physical prototypes to detect the flaws and make the final product better.

You will also need to build product prototypes to give it to people for their suggestions. Based on their suggestions, you may need to alter the product design and create new prototypes again. Of course, this is a tedious process, but it is vital to achieving a flawless product design.

There is nothing easy about product design. For successful product designs, massive skills and experience are needed; skills and experience like GID Development Corporation has.

We are one of the leading product design companies in California, USA. We have decades of experience in the field, and have delivered thriving product design solutions to our clients (inventors) in the US and worldwide.

Along with product design, we provide rapid prototyping, product development, product manufacturing, and other product fulfillment services. No matter how complex the product concept is, we will help you realize it. To learn more, visit https://www.gidcompany.com.

Have any questions regarding product design? We are offering a 15-minute, FREE telephonic consultation. Just call Jim Grimes at 714-323-1052 between 8:00 AM to 5:00 PM PST.

Categories
Product Development Company

Engineers who can Help Bring your Product Concept to Reality

Product development, especially for a budding inventor, can certainly be a daunting task. It is very important that you, as an inventor, get in touch with the right engineers in order to breathe life to your product. However, oftentimes, it can be very confusing what kind of engineers you require in order to develop your revolutionary product.

Normally, it will be in your best interest to approach a good product development company that has multiple engineers with different skill sets on board. The reason for this is that your breakthrough product could be anything – an electromechanical product, a product with electronics, medical device product, or a product with imbedded software. Now, developing such products will require different engineers and not just one kind of engineers.

Here are some of the common engineers whom you should be able to find in a good product development company that you may decide to hire.

Industrial Engineer

If your potential product needs a custom plastic case, then industrial engineers are the ones who will help. Most inventors delay taking the assistance of an industrial engineer because they somehow work out with a stock, off-the-shelf case for their products. Unfortunately, such products, in most cases, fail to make an impact because they lack aesthetics and ergonomics. Off-the-shelf cases neither provide aesthetics, nor ergonomics. They are just plain old cases.

Industrial engineers can help with the ideal product design. Whether your product is too complex mechanically or too elaborate electronically, they can help create a suitable case for your product, which has excellent aesthetics and ergonomics.

If your product is too simple, mechanically or electronically, then you can get the case designed by a 3D modeler. Using a computer-aided industrial design software application, like Dassault Systèmes’ CATIA, a 3D modeler can help create detailed designs of a case, for your product. You can then take these detailed designs to a good plastic product manufacturer who can help bulk manufacture the product cases.

Electrical Engineer

If you are developing a product with electronics, electromechanical product, or a product with imbedded software, you will need the assistance of good electrical engineers. Electrical engineering is a broad field; hence, it will be a good idea to go to a product development company that has several electrical engineers with different skill sets. An electrical engineer, who can work on a high-voltage system cannot work on portable devices! Similarly, an electrical engineer, who can design schematics and PCB layouts for products with imbedded software will have difficulty programming a microcontroller for those products; it actually requires a software engineer with specialization in electronics to program a microcontroller for products with imbedded software.

Some electrical engineers specialize in analog design while others specialize in digital design. You might be able to find engineers specializing in multiple disciplines, but such professionals are very rare! Therefore, get in touch with a good product development company that has on board a handful of electrical engineers with specialization in different electrical engineering disciplines.

Mechanical Engineer

If your product has moving parts, mechanical engineers can help you design and develop that product. Similar to electrical engineering, mechanical engineering is a broad field. In fact, it is the broadest field of engineering. Mechanical engineering involves the application of mechanics, material science, kinematics, structural analysis, and thermodynamics to name a few. No single mechanical engineer has the skills to apply all these core concepts. For that reason, hire a product development company that has several mechanical engineers on board.

Aside from these, there are biomedical engineers who help with the design and development of medical device products, biomechanics engineers who help with the design and development of sports products, manufacturing engineers who help with the design and development of machines, tools and equipment, power engineers who help with the design and development of high-voltage power systems, and many more.

With it comes to new product development, it is always a good idea to go to an eminent product development company that has on board a good team of engineers having specialization in different engineering fields.

If you are in search of such a product development company, then look no further than GID Development Corporation. A leading product development company in California, USA, GID Development Corporation provides A – Z services, from new product design to taking the new product to the consumers and everything in between. They have an experienced in-house team of engineers, product designers, and other professionals that can help bring any product concept to reality.

Learn more about GID Development Corporation by heading over to their website https://www.gidcompany.com/.

Currently, the leading product development company in the US, GID Development Corporation is offering a free 15-minute telephonic consultation with one of the veteran industrial engineers, Jim Grimes. You can call Jim at 714-323-1052 between 8:00 AM to 5:00 PM PST.

Categories
Product Design Product Development Product Development Company

8 Steps to Take your New Product Idea from Concept to Consumers

steps involved to bring a simple product idea to life and take it to the market, i.e. to the intended consumers. If you are an innovator with a solid new product idea, wanting to materialize your brilliant product concept, then here are 8 steps that you need to heed and follow.

Step 1: New Product Concept

This step usually consists of rough sketches of your new product idea. If you have not put your product idea or thought, on the papers yet, then you should immediately do so. Doodle rough sketches of your concept. Along with sketches, it will be very helpful to furnish some information about your product. Write down what your product is, what features it will have, how the consumers will use it and so on. If you have knowledge of computer, then prepare the rough sketches and note down the info about your product in a good computer application.

Step 2: Extensive Research

After drawing rough sketches and writing down info about your intended product, you might now have a good overall idea about the new product. Now perform a market research: is there any demand for your new product? Whether any similar product or products exist in the market? If similar products exist, how is your new product going to be better? What region will be profitable? You need to answer such questions in order to create and launch a successful new product.

Step 3: New Product Design Development

After gathering valuable info from an extensive market research, you can proceed to develop feasible product designs for your new product. New product design can be complicated; you need to answer several questions in order to create a viable product design for your new product:

  • What are the functions of my products?
  • Will it withstand rough use?
  • Will it be re-usable?
  • Can the product be developed at a reasonable price?
  • For mass manufacturing, will the manufacturing process be easy? Does the product contain multiple parts?
  • What will be the quality of the product?
  • From which materials can the new product be made?

All these questions and more need to be answered while creating new product designs for your product.

Step 4: New Product Prototype Development

When you get a viable product design, you can then proceed to create prototypes based on the design. A prototype is the first tangible form of your new product idea. You can see it, touch it and actually feel it. A product prototype can be as simple or as complex as you want. With a product prototype, you can actually get a complete picture of your new product. It also helps attract potential stakeholders, and eventually, the capital that is needed for mass manufacturing. Product prototype development in the past was expensive; however, with the advent of new technologies, for instance, Dassault Systèmes’ 3DEXPERIENCE platform, new product prototype development is now cost-effective.

Step 5: Testing & Feedback

This is a very important step. Once you have a solid product prototype, you can perform various tests on it. Test it to see whether it works the way it is intended to work. You can also test its sturdiness. After testing the prototype, give it to a group of potential consumers and see how the consumers react. The group of potential consumers will also give valuable feedback, which you can implement before developing and launching the final product. If certain tests fail, or if there are certain features that need to be added, you can go back to Step 3 and Step 4. Thereafter, you again need to perform Step 5. You need to keep on doing this until you achieve a well-accepted product prototype.

Step 6: Mass Manufacturing

Once you have a well-accepted product prototype, which has passed tests and has all the features that the potential consumers had suggested, you can proceed to mass manufacturing. For mass manufacturing, you can go to an already established manufacturer, or you can set up your own production facility; it all depends on the capital you have.

Step 7: Quality Test, Packaging, and Branding

The final product needs to pass through various quality tests. The final product should be flawless in terms of quality, design, and functionality. While the final product is going through quality tests, you need to come up with suitable packaging for the product. You cannot simply give a bare product to the consumers. You need to have a proper package for your product. Along with the packaging, you also need to develop a brand name of your product. You need to come up with unique, enticing logos for your product. Further, you also need to develop certain promotional items for your new product. Advertising and publicity are also necessary in order to let the consumers know about your new product.

Step 8: Launch

Finally, it is time to launch the product in the market. By now, you will already have enough stock of your product. Arrange for the proper channels for your product distribution. You will also need to arrange or set up proper outlets where you can sell your product.

Well, that is it. These are the steps that you need to heed and follow to bring a new product of your own into the market. Mind well, these steps may look simple, but they are not. It requires considerable time, effort and resource. While you can do these all on your own, there are certain product design and product development companies that can help you out. For instance, GID Company can help you materialize your idea, and also help take your new product to the potential consumers.

GID Company is a product design and product development company based in California, USA. They have numerous years of experience in new product design and product development. Whether it is new electromechanical products, medical device products, products with electronics, products with imbedded software, or any other types of products, GID Company can design, develop, and deliver it to the market.

Learn more about GID Company by visiting https://www.gidcompany.com/.

GID Company is also offering a free 15-minute telephone conference with one of the product design and development veterans, Jim Grimes. You can call Jim at 714-323-1052 between 8:00 AM to 5:00 PM PST.

Categories
Product Design

Steps in Successful Product Design

New product design may seem like an easy process. The fact, however, is that it is not. A new product design involves several steps and processes that need due consideration. Failing to heed these steps and processes definitely will lead to unsuccessful product design. Here are some of the steps that entail in successful new product design.

Step 1 – Evaluating the Problem

This is the primary step where you need to identify the real problem in the market. By identifying the real problem, you can come up with innovative ideas, and thereafter, solutions to resolve the identified problem. Your idea could stem from the lack of an adequate product in the market, or a product in the market that does not function as well as it should.

Step 2 – Extensive Research

This step involves thorough researching to see what similar products are currently

in the market. This is important as it ensures that the new product you are thinking about introducing in the market does not already exist. On the other hand, it will also help you identify various problems with the existing products. Understanding the problems with the current products will help you design your new product better.

Step 3 – Generating Ideas

After performing in-depth research, the next step is where you can begin forming ideas and concepts to come up with a viable solution. This is where you can start sketching your ideas and jotting down a list of features for your product on a piece of paper. It will be in your best interest if you can use a computer to draw your sketches and note your list of features. Computers are more reliable than papers or sketchbooks!

Step 4 – Creating Prototypes

Once you have the perfect or near perfect product design, you can proceed to product prototype development. This is the step where you can actually begin to see your idea materialize. A product prototype is a working / non-working model of your product concept. A prototype is beneficial in numerous ways; it gives you the picture of how your product will look like; it allows you to test and analyze so that you can make any changes if required; it helps attract potential stakeholders, and eventually finance for taking your product to the final stages.

Step 5 – Final Design

After the success of the prototype, you can proceed to finalize the product design. This final product design should incorporate all the intended functions as well as aesthetic aspects of the product. This final design should also comply to various standard compliances if there are any. Think of this final design as a product that is in a real consumer’s hand.

Step 6 – Thorough Testing

This is a vital step. Before proceeding to mass manufacturing and launching the product in the market, it is of cardinal importance that the product goes through rigorous testing. Product testing should not only be performed by experts, but by potential customers, as well. In case something goes wrong during this stage, like dislikes of product aesthetics or certain functions, you can go back a couple of steps and improve your product further. It will, of course, cost you to go back a couple of steps, but it will not cost as much substantially as it would if you skip this step.

Step 7 – Mass Manufacturing

If everything goes well during the testing stage, you are ready for mass manufacturing. Simultaneously during the mass manufacturing, you should also perform marketing and establishing distribution channels so you can take your product to the market.

If you want to learn more about new product design, visit veterans at GID Development Corporation https://www.gidcompany.com/. GID Development Corporation is a leading product design company in California, USA. With a combined experience of over 40 years, the professionals at GID Development Corporation provide A – Z product fulfillment services.

You can also Call Jim at 714-323-1052 between 8:00 AM to 5:00 PM PST for a free consultation.

Categories
Product Design

Product Design – Where to Begin

Produce design, i.e. creating a design for a new product or technology, is not easy, and it requires extensive planning. One problem that budding product designers and veteran innovators frequently face is in knowing where to begin with the design process. When it comes to product design, knowing what the first step is can give you a boost for the entire process. Creating a new product design plan is the fundamental step when developing better products and technologies; however, creating a product design plan itself comprises several smaller steps.

Here are the small steps that a new product design plan contains:

Research

The fundamental phase of the planning process for any new product or technology is to carry out some research so that you can determine the viability of your concept. Before moving forward with your product design, you will need to find out things like, whether there is any market for the product, how large the market is, what is your target MSRP (manufacturer’s suggested retail price)

, and so on. Researching about such aspects is vital; because no matter how nice a product is, if the market (consumers) does not need it, it will be a waste of time, money and resources for designing and developing such a product.

Scope

Another phase of the planning process is defining the scope of your product. After determining the viability of creating a new design by conducting some research, you will now have to figure out to what extent the market (consumers) will use your product. If the market is limited to the existing consumers who already have other product options available, your design plan may simply involve altering an existing design, instead of developing a new design from scratch. The scope eventually determines how the product design process should be carried out.

Actual Design – The Blueprint

While many product designers and inventors think that creating an actual design of the product is the first part of the planning process or the first thing they should do, it is, in fact, not the case. Creating actual design or the blueprint of the product should be done only after performing the research and defining the scope.

Actual design or the blueprint gives you the visual representation of how your product will look like. You can create the actual design in a sketchbook, or on the computer, using a good software application. Once you are through with the actual design, you are through with the product design phase; you can now begin with the product development phase.

Product Prototyping and Testing

Once you have the actual design or the blueprint of your product, you can proceed towards creating a prototype for it. A product prototype is a tangible representation of your product concept, and it allows you to test the product design to see if it meets various quality standards and does what you designed it to do.

If the product design is successful, you can proceed with the bulk manufacturing of your products.

If you are looking for professionals who can help with the product design in California, then consider GID Company. With significant years of rich experience, the experts at GID Company can help with every phase of product design, product prototyping, product development and mass manufacturing of new products. Jim Grimes at 714-323-1052 8am to 5pm PST for a free consultation.

To learn more about them, visit https://www.gidcompany.com/

Categories
Product Design Product Development

Industrial Product Design and Development Services, USA

So, you just had your eureka moment? Do you believe your concept can really stir the market in your favor? Are you really planning to design and develop the new product? Are you in search of an American product design and development company? If your answer to all these questions is “Yes”, then congratulations, you have landed on the right place.

We are the GID Development Corporation, an American Product Design and Development Company, helping small, mid-sized and large companies create new products that can escalate their profit margin as well as enhance their brand presence, globally. We know that the process of new product development starts as an idea or an improvement in the concept of an existing product (in terms of features and appearance). However, manufacturing a new product is a complicated job and not everyone’s cup of tea. To come up with the new product that can stir the market in your favor, you need a comprehensive analysis report of your targeted market and a potent product development strategy.

Flawless Product Design Service

Based in California, the GID Development Corporation is an established product design and manufacturing company with more than four decades of industry experience. During our journey, we have worked with businesses belonging to different industries such as healthcare, automotive, lifestyle, plastic products, and sporting goods to name a few. A sound team of qualified and experienced product designers and engineers make us stand above the ordinary service providers in the market. We have a team of highly qualified, experienced, and creative product designers who strive for nothing but the best.

Our product designers continuously explore the product development industry to offer solutions that are far superior to ordinary solutions available in the market. Our team of product designers can carry out a wide variety of functions, based on the existing industry trend, competition and research.

Product Development Services

At the GID Development Corporation, we have a strong team of product engineers and project managers that include electronic and software engineers, mechanical engineers, researchers, prototyping experts, and industry specialists, who lead our product development projects from the front. Our thorough, statistics-based development services are designed to deliver products that are customers centric, without exceeding the timeframe and defined budget.

Call Jim Grimes @ 714-323-1052 for a Free Telephonic Conference

When designing and manufacturing a new product, it is necessary that we stay focused and proactive so that our efforts result in a rewarding new product. A proactive approach from the very beginning can save time and money.

If you had that eureka moment, and if you wish to bring your concept to life, then we welcome you to share your ideas with us. For product design and development services Call Jim at 714-323-1052