Categories
Product Prototype Development

Prototype Development of Products with Electronics

Do you have a great idea for a new product with electronics? Want to materialize your idea into a real product and take it to the market? Well, the first thing to do is to develop a working prototype. Prototype development of products with electronics is essential in order to test and try the products before introducing them to the actual consumers. So, where should you begin when it comes to prototype development of products with electronics?

Prototype development of products with electronics is, no doubt, challenging and expensive. You also would not get the desired results immediately without a prototype. If you, however, break down the product prototype development process into manageable steps, it is possible to succeed with the working prototype.

Prototype development of most products with electronics can be divided into two segments – the electronics segment and the plastic case segment. Let us have a look at each of these segments.

The Electronics Segment

Developing a prototype of the electronics segment of your conceived product can be divided into four steps.

If you are well-versed with electronics or if you are a do-it-yourselfer, you can skip the first two steps. Else, you will need to team up with a product prototype development company that is experienced in the development of prototypes for products with electronics.

Step 1. Create the Schematic

The first step in the development of the electronics segment is the creation of the electronics blueprint or schematic for your product. This blueprint states all the important details to build the electronics segment, including how the necessary components and modules are connected together.

Which components are needed will also be specified in the schematic. A bill of materials (BOM) or associated list will be prepared, itemizing every electronic item.

Step 2. Develop a Basic Prototype

Depending on your project and your budget, you may or may not want to develop a basic prototype of the electronics segment.

In order to create basic prototypes for the electronics segment, you can use breadboards. Utilizing breadboards, you can somewhat crudely, but fairly quickly connect various electronic components. If your project requires advanced electronics, you may also use ready-to-use modules like the Raspberry Pi and Arduino.

Step 3. Design a PCB Layout

You will, at some point, require a production-quality prototype of your conceived product. And in order to create a production-quality prototype, you will require the design and creation of a PCB (printed circuit board).

A printed circuit board is a custom-designed board that holds and connects all the necessary electronic components. Utilizing a special computer application, electronic engineers can turn the schematic of the electronics segment of the conceived product into a virtual layout. Designing a PCB layout is challenging because anything out-of-place can have a big impact on the performance of the final product.

Step 4. Fabrication of the PCBs & Assembly of the Electronic Components

After having a definitive PCB layout, you will need to send the layout to an electronics prototype development company for construction. Such a prototype development company will first fabricate empty PCBs.

After the fabrication of the PCBs, the next step is to assemble the various components on the PCBs through soldering. Most of the modern electronic components are minute and compact, making it very difficult to solder them manually. Therefore, a product prototype development company might employ automated machines to solder the compact and minute electronic components.

The Plastic Case Segment

Most products with electronics need some enclosure, and plastic cases are often the best choice. In order to create a custom-shaped plastic case for your prototype, you will need to utilize 3D printing or CNC machining.

Step 1. Create a 3D Model

You need to first design a 3D computer model of the required plastic parts. Unless you are proficient at creating 3D computer models, you will need someone expert for this step.

Even if you are capable of creating 3D computer models yourself, the computer software required to create definitive 3D models is very expensive; hence, it may be in your best interest to hire a 3D modeling expert.

Step 2. 3D Printing

Once you have the 3D model of the plastic case or other plastic parts, you can send the design files to a 3D printer for effortless and rapid prototyping. If you do not have a 3D printer, you can approach a prototype shop that offers a 3D printing service.

On the other hand, you can also procure your own 3D printer. In the past several years, 3D printers have become cheap enough for personal use.

For the large-scale production of certain plastic cases and parts, however, a completely different technology is utilized. It is called high-pressure injection molding. Shifting a plastic design from a mere prototype to full-scale production is a complex as well as an expensive process. Therefore, teaming up with a plastic product manufacturer, that specializes in plastic product manufacturing with different techniques, will be a wise move on your part.

Product prototype development is vital. Once you have a working prototype of your electronic product, you can proceed to get potential stakeholders, customer feedback, and a mass manufacturing partner. The path to success of a product with electronics is long, but it all begins with a product prototype.

If you need help with prototype development for products with electronics, then get in touch with GID Development Corporation. A new product prototype development company in California, USA, GID Development Corporation utilizes state-of-the-art technologies in order to develop precise product prototypes quickly and economically.

Aside from product prototype development, GID Development Corporation also provides product design, product development, and other product fulfillment services. GID also possesses the skills and knowledge of a plastic product manufacturer that help them develop various plastic parts, components, and cases using different injection molding techniques.

Whether it is design, development or prototyping of products with electronics, products with imbedded software, mechanical products, electromechanical products, medical device products, or any generic or special-purpose products, GID Development Corporation will certainly “GET IT DONE!”

To learn more about GID Development Corporation, visit https://www.gidcompany.com/.

If you have any question regarding product design, product development or product prototype development, simply give GID a call. Currently, GID is offering a free 15-minute telephonic conference. So, just call Jim Grimes at 714-323-1052 between 8:00 AM to 5:00 PM PST.

Categories
Product Prototype Development

Useful Product Prototype Development Tips

Product prototype development is one of the most important phases in the new product development process. While the process of manufacturing and taking a product to market can be daunting and overwhelming for an aspiring entrepreneur, the most important step, after finalizing an idea, is to build a product prototype. A product prototype allows your customers, investors, and partners to see a physical representation of your concept. However, prototyping a product is much more than just a drawing; it is a complex process that requires expertise in different aspects of engineering.

Tips for Successful Product Prototype Development

Specific Needs – The first step towards successful product prototype development is deciding what your requirements are. You need to pen down what you require and expect from your product prototype. Are you planning to develop a rough model, or a more detailed, fully functional and presentation-ready model of your concept? Depending upon your future plans and capital available, you have to decide where to start.

Experienced Partner – After penning down all your requirements, it’s time to find a product prototype development company to work with you. Hiring a company for product prototyping may sound unusual to you, but it is necessary unless you have experience of handling CAD software and 3D printing. You won’t be able to handle everything involved with developing a product prototype by yourself. Finding a local partner is a great way to develop a lasting relationship for the further development of your product.

Design Rendering – Now, as you have decided upon the type of prototype and have a product development company ready to assist you, you need to bring your concept on paper or get it designed by professionals. Get a rendering form of the prototype you actually need so that it can become a reality. At this initial stage, don’t shoot for perfection because chances are, you will be making numerous modifications to your current concept.

Bill of Materials – Since you have brought your concept on the paper, it’s time to analyze what it takes to get it developed. The company you hired for prototyping and manufacturing purposes should be aware of the costs of materials you require for developing a prototype. Ask the company about the cost of the materials required and types of materials required for the future development of the product as well.

Capital Investment – Whether you are developing a prototype or manufacturing a product, you should avoid unnecessary spending of money. Depending on the type of your project, a prototype can be developed using limited and easily accessible materials such as cardboard, paper, plastic, etc. This step will help you avoid unnecessary spending of money.

The most important point to remember while developing a product prototype is that your first prototype is only a representation of your concept and doesn’t have to be perfect. As you move ahead with the prototyping process, you will experience numerous changes in the coming weeks and months.

Do you have a new product concept in your mind? Do you want to discuss the feasibility of your concept? Do you want to design or prototype your concept? If yes, industry veterans at the GID Development Corporation are here to help. Call Jim at 714-323-1052. Contact us at www.GIDCompany.com.

Categories
Product Prototype Development

Important Points to Remember During Product Prototype Development

The purpose of product prototype development is to shorten development times and to reduce the costs of product development. A product prototype is a working model that offers a much clearer picture of the system to be developed, but only if it is done right. Thus to help entrepreneurs develop a fully functional prototype, here is the list of some of the most important points to remember while developing a product prototype, and they are as follows:

Keep ready a potent prototype plan – Most entrepreneurs believe that a product prototype development is a linear process. Product designers come up with product designs, conclude the best product design, create a prototype, and test it before proceeding to bulk manufacturing.

However, the process of product design and rapid prototyping is much more iterative. Separated teams and departments in an organization ideates, votes on the most rewarding and transformational ideas, and everyone adopts an empathetic mindset to understand what customers actually require. In the process of new product development, the phase of product prototype development is all about failing and incorporating feedback on the go, so you can reach a profitable product at the earliest.

Keep the product prototype simple – While developing a product prototype, most entrepreneurs believe that they have to come up with an impressive prototype at the first attempt and then simply collect feedbacks before taking it to market. However, when they do that, they spend thousands of hours and dollars to produce something customers don’t understand or don’t require.

In design thinking, to develop a product prototype, you utilize the materials that are readily available to you. Utilizing simple materials to develop a product prototype helps you get the idea out on the table, without investing extra time and money. Creating a simple product prototype helps you gain incredibly valuable feedback.

Collect valuable, informed feedback – When you test your prototype, search for actionable ways to enhance it. Carry your product prototype to a wide variety of audiences, even if it is of low resolution or made out of simple materials such as pipes and cardboard, and explain it to them. If explaining is not enough, tell them how your product can be used. The sole intention of your prototype is to gather valuable, informed feedback that’s both negative and positive. Always welcome questions, comments, and new ideas for making your concept better.

Time to act on feedback – You have to keep your team on standby, asking them to pay attention to feedback and iterating it on the go. The valuable feedback that you received after developing a prototype will help you make a better product, or help you find out that your prototype is going nowhere. In both the cases, you stand a chance of delivering an improved product, which will be loved by your customers.

The ultimate goal of rapid prototyping isn’t to perfect your final product; it is to create ideas until you have cinched all the basic aspects. Then you can create a superior version to test.

A product prototype development allows you to bank on ideas and feedbacks in almost real time. Learning lessons from the failures and implementing them into to the process allows an entrepreneur to easily tweak and embellish a product with relatively low cost.

If you are looking for rapid prototyping services in the United States, then feel free to contact us at www.GIDCompany.com.

Categories
Product Prototype Development

Call 714-323-1052 for Professional Prototype Development Services in the USA

At The GID Development Corporation, we offer product prototype development services at its best with high accuracy and precision. We understand the importance of product prototype development in the process of new product development; hence, to attend the highest level of perfection, we use all the latest technologies and techniques to convert an idea into a fully functional prototype.

As an established and experienced product design and product development company in USA, the GID Development Corporation is dedicated to offering entrepreneurs and innovators with a single source for custom manufactured parts and products. With a focus on delivering value to our clients, we endeavor to modernize the product development process by offering the revolutionary rapid prototyping and product design service options all at one place. Our product designers and engineers are highly skilled and aim to deliver prototyping solutions that best-fit budget, time constraints, and manufacturing requirements.

Rapid Prototyping is one of the crucial steps in the custom product development; hence, it should be done right. Developing a product prototype on your own or with the help of a prototyping company will help you test your concept before you proceed to bulk manufacturing phase. Moreover, prototyping makes your concept a physical reality. A fully functional product prototype not only lets you test the functionalities, but also helps you impress your financiers and potential customers.

As an American product prototyping company, we are well aware of each-and-every traits of rapid prototyping. The GID Development Corporation offers multi-faceted rapid prototyping services, including selective laser sintering (SLS), stereo lithography (SLA), high-speed CNC machining and professional prototype model making. By applying the most advanced prototyping technology, our team of highly qualified engineers and designers is capable of meeting the most stringent requirements in terms of time, cost and precision in the development of product prototypes.

With more than four decades of industry experience, GID is the best choice that can help you to carry out rapid prototyping in the most professional manner. Our product designers can convert your concept into a working prototype that will help you to understand how your product will perform before starting the manufacturing process. Here at GID, you can get professional prototyping services, which help you get more accurate and a relevant product that fits business needs. We specialize in creating a prototype out of a wide variety of materials such as plastic, rubber, wood, electronics, fabrics, glass, metal, silicon and other available materials. For more information, contact us at www.GIDCompany.com.

Categories
Product Prototype Development

What are Important Points to Consider Before Product Prototype Development

As an entrepreneur, you admit it or not, but product prototype development has its own importance and significance in the process of new product development. It not only lets you test the product design and functionalities, but it also helps you to attract investors and new customers. Additionally, with the help of a fully functional product prototype, you can also create a pre-launch buzz about your product in the respective market. Because of hundreds of advantages offered, product prototype development is gaining immense popularity among the product-based companies across the globe. However, there are some important questions that needs to be answered before you proceed for product prototype development.

However, successful product prototype development is not everyone’s cup of tea—it’s a secret recipe. To help entrepreneurs develop a fully functional prototype in no time, GID, a product development company in California, lists the most important points to consider before any prototype development.

Entrepreneurs Need To Answer These Questions Before Prototype Development

A working prototype helps product analysts, designers, and engineers to produce the final product with required functions. However, here are some points to consider before you start prototyping your concept.

  1. What will be your product’s features and attributes?
  2. What are you offering via the product that your competitors’ products don’t?
  3. For how many years should your product last?
  4. What is the objective of your product?
  5. Do you need to include any new technology to create the product?
  6. Where will it be developed, packaged, promoted and sold?
  7. What will be the manufacturing cost?
  8. What will be its price in the market?
  9. Is your product complying with government regulations or not?
  10. Is your product safe and eco-friendly?
  11. Is it going to face patent infringements or other possible hang-ups?

Contact a Product Prototype Development Company

New product development begins with an idea; however, bringing it to life demands a lot of time, patience, money, expertise, and hard work. For entrepreneurs, who are planning for custom product development in near time, there are product development companies such as the GID Development Corporation in California to help you at every stage of custom product manufacturing. These product design and development companies have skilled resources, industry experience, and tools to bring ideas to life in the most rewarding manner.

The GID Development Corporation is a product manufacturing company based in California propelled ahead by like-minded professionals, seeking splendid success in whatever they do. They love to collaborate and transform ideas into reality with rapid prototyping. GID specializes in producing prototypes for plastic, production equipment, metal, electronic and many more.

For more information, you can contact our professionals at info@gidcompany.com or visit our website: https://www.gidcompany.com/our-portfolio/ to view our product development portfolio.

Categories
Product Prototype Development

What to Look For in a Product Prototype Development Company in the USA?

The requirement for high-quality product prototype development services is as important to inventors as it is to entrepreneurs. Rapid prototyping not only offers life to your concept, but it is also a service that is important at different stages of the product development process. For inventors, product prototype development provides the ability to perceive how a product concept that exists as a drawing or computer model will actually look and feel. For a product development company, a product prototype development allows them to improve the product design before an expensive manufacturing process is initiated.

The industry of product prototype development has noticed significant advancements in technology and manufacturing processes, which in turn, have reduced the cost and delivery time for manufacturing highly precise, functional prototypes. As a result of technical advancements, the use of prototyping has become much more economical and available for all types of businesses. If you are an inventor or manufacturer, finding a product prototype development company in the USA with a wider range of service offerings, then find a company that also offers the following:

Comprehensive Feasibility Studies– A comprehensive feasibility study of your proposed product will empower the prototype development company to help inventors and businesses recognize product, available technology, and manufacturing limitations. A complete feasibility study can help you overcome many unseen product manufacturing problems.

Industrial Design– A product development company that you intend to hire should be well versed in industrial design services. An established company can conduct a design analysis for you and identify problem areas with your parts before you move to the next phase. A thorough product design analysis can save thousands of dollars and valuable time.

Product Development Cost Analysis– A well-planned financial layout for a new product development is priceless. A detailed financial layout will help you raise funds for the proposed product. This kind of analysis may include elements such as product tooling costs, the cost of raw material, cost-per-part breakdown, post manufacturing costs, and an estimation on labor costs. A well-thought-out plan ensures that your product manufacturing process is not interrupted due to financial problems.

Other Areas of Expertise– A product development company should possess expertise in other areas such as contract research and development, proper understanding of industry standards, education and training in the product development industry, knowledge of licensing and copyright laws, and many other areas of specialty research.

In addition to above mentioned characteristics, one more important aspect to look for in a product prototype development company in the USA is a company that has separate teams of skilled product designers, prototype experts, product engineers, and project managers to efficiently handle your requirements.

We are GID Development Corporation keen to help inventors, entrepreneurs, and businesses design, prototype, and launch new products into the marketplace. GID specializes in custom product design and development – with a focus on the concept design engineering, product design for prototyping and manufacturability, marketing presentations, and more. GID can also offer information on patent protection and intellectual property services. To get in touch, please visit https://www.gidcompany.com/contact-us